MODEL : GS-SM (MEDIUM VOLTAGE), RoHS 2, IEC61111:2009 CLASS 2, DIAMOND, BLACK, 5mm Tk x 1,000mm Width x 6m Length/roll
ELECTRICAL INSULATION RUBBER MAT, MODEL : GS-SM (MEDIUM VOLTAGE), RoHS 3, IEC61111:2009 CLASS 2, DIAMOND, BLACK, MINIMUM 30KV WITHSTAND VOLTAGE FOR 3 MINUTES (180 SECONDS) WITHOUT PUNCTURE, C/W
1) THIRD PARTY TNB DIGITAL QR CODE LAB TEST CERTIFICATE
2) SGS RoHS 2 TEST CERTIFICATE
The expanded list for RoHS 3 ( RoHS 1 + RoHS 2 ) is thus as follows:
RoHS 1 :
Cadmium (0.01 %)
Lead (0.1 %)
Mercury (0.1 %)
Hexavalent chromium (0.1 %)
Polybrominated biphenyls (PBB) (0.1 %)
Polybrominated diphenyl ethers (PBDE) (0.1 %)
RoHS 2 :
Bis(2-ethylhexyl) phthalate (DEHP) (0.1 %)
Butyl benzyl phthalate (BBP) (0.1 %)
Dibutyl phthalate (DBP) (0.1 %)
Diisobutyl phthalate (DIBP) (0.1 %)
A) Product Name
Model : GS-SM ( MEDIUM VOLTAGE) DIAMOND Switchboard Matting / Non Conductive Switchboard Mat / Dielectric / Medium Voltage Insulation Rubber Mat
B) Raw Material
NATURAL RUBBER ( NR ) BASE POLYMER
Switchboard matting is a non-conductive high density rubber compound engineered to prevent electric shock around high voltage equipment.
The non-conductive rubber compound creates an insulating barrier between the electrical source and ground.
Our GS-SM is tested according to IEC61111:2009 Clause 188.8.131.52 under IEC 61111:2009 Class 2 , Ideal for Dielectric Voltage / Withstand Voltage: 30,000 VAC and Recommended Maximum use Voltage : 17,000 VAC
1) Brand : GSE™
2) Model : GS-SM Switchboard Matting / High Voltage Insulation Rubber Mat
3) Top Surface - Anti Slip DIAMOND , with anti slip DIAMOND surface to provide safe working environment, pattern surface “grabs” the bottom of footwear, improving traction and safe from slippery .
4) Colour : Black
5) DIGITAL Test Certificate : AVAILABLE
6) Product Compliance Status :-
A) BS EN 61111 Clause 184.108.40.206 Class 2 , Voltage Withstand Test
B) Comply to RoHS I & II , On 4th June 2015, Commission Directive (EU) 2015/863 was published in the Official Journal of the European Union (OJEU) to include the phthalates ( BBP, DBP, DEHP and DIBP, these chemicals are used to soften PVC and Vinyl products ) into ANNEX II of the RoHS Recast Directive.
The new law restricts each phthalate to no more than 0.1% ( mg/kg = ppm ; 0.1wt% = 1,000ppm ) in each homogeneous material of an electrical product.
1) Nominal Thickness : 5mm
A) Brand : GSE™ , Model : GS-SM ,Switchboard Matting, ( BLACK colour ) , 5mm Tk x 1,000mm Width x 6,000mm ( 6 m ) Length / roll , Weight / roll : Approximately 38kgs / roll
" Genuine Mark “ on Rubber Mat ( Bottom )
1)Trade Mark , Model # , Lot # , Certificate # , Test Certificate QR Code , IEC Class Code , Withstand & Max use Voltage & Colour Coding defined .