MODEL : GS-SLG (HIGH VOLTAGE), RoHS 2, IEC61111:2009 CLASS 4, CORRUGATED, BLACK, 6mm Tk x 1,000mm Width x 6m Length/roll
HIGH VOLTAGE ELECTRICAL INSULATION RUBBER MAT, MODEL : GS-SLG, RoHS 3, IEC61111:2009 CLASS 4, CORRUGATED, GREY, MINIMUM 50KV WITHSTAND VOLTAGE FOR 3 MINUTES (180 SECONDS) WITHOUT PUNCTURE, C/W
1) THIRD PARTY TNB DIGITAL QR CODE LAB TEST CERTIFICATE
2) SGS RoHS 1 & RoHS 2 TEST CERTIFICATE
3) SIRIM D635 TEST CERTIFICATE
4) SIRIM BS 476 : Part 6 : 1989+A1:2009 TEST CERTIFICATE
Fire Test on Building Materials and Structures ,
Part 6: Method of Test for Fire Propagation for Products.
The expanded list for RoHS 3 ( RoHS 1 + RoHS 2 ) is thus as follows:
RoHS 1 :
Cadmium (0.01 %)
Lead (0.1 %)
Mercury (0.1 %)
Hexavalent chromium (0.1 %)
Polybrominated biphenyls (PBB) (0.1 %)
Polybrominated diphenyl ethers (PBDE) (0.1 %)
RoHS 2 :
Bis(2-ethylhexyl) phthalate (DEHP) (0.1 %)
Butyl benzyl phthalate (BBP) (0.1 %)
Dibutyl phthalate (DBP) (0.1 %)
Diisobutyl phthalate (DIBP) (0.1 %)
A) Product Name
Model : GS-SLG ( High Voltage ) Corrugated Switchboard Matting / Non Conductive Switchboard Mat / Dielectric / High Voltage Insulation Rubber Mat
B) Raw Material
NATURAL RUBBER ( NR ) BASE POLYMER
Switchboard matting is a non-conductive high density rubber compound engineered to prevent electric shock around high voltage equipment.
The non-conductive rubber compound creates an insulating barrier between the electrical source and ground.
Our GS-SLG is tested according to IEC61111:2009 Clause 22.214.171.124 under IEC 61111:2009 Class 4 , Ideal for Dielectric Voltage / Withstand Voltage: 50,000 VAC and Recommended Maximum use Voltage : 36,000 VAC ( High Voltage Switchboard Matting )
1) Brand : GSE™
2) Model : GS-SLG Switchboard Matting / High Voltage Insulation Rubber Mat
3) Top Surface - Anti Slip Corrugated , with anti slip corrugated surface to provide safe working environment, pattern surface “grabs” the bottom of footwear, improving traction and safe from slippery .
4) Colour : Grey
5) DIGITAL Test Certificate : AVAILABLE
6) Product Compliance Status :-
A) BS EN 61111 Clause 126.96.36.199 Class 4 , Voltage Withstand Test
B) Comply to RoHS I & II , On 4th June 2015, Commission Directive (EU) 2015/863 was published in the Official Journal of the European Union (OJEU) to include the phthalates ( BBP, DBP, DEHP and DIBP, these chemicals are used to soften PVC and Vinyl products ) into ANNEX II of the RoHS Recast Directive.
The new law restricts each phthalate to no more than 0.1% ( mg/kg = ppm ; 0.1wt% = 1,000ppm ) in each homogeneous material of an electrical product.
1) Nominal Thickness : 6mm
A) Brand : GSE™ , Model : GS-SLG ,Switchboard Matting, ( GREY colour ) , 6mm Tk x 1,000mm ( 1m ) Width x 6,000mm ( 6 m ) Length / roll , Weight / roll : Approximately 50kgs / roll
" Genuine Mark “ on Rubber Mat ( Bottom )
1)Trade Mark , Model # , Lot # , Certificate # , Test Certificate QR Code , IEC Class Code , Withstand & Max use Voltage & Colour Coding defined .